6th Port info needed (RE: SP63 Secondary kit)

Hey there,

As part of my upcoming build, due to previously purchased parts, I went with the Kozmic kit. I've noticed after staring at the images on web and finally opening the box, that the only info on any of the forums is the "rough install for 5th port" on MSF. Several of the items are different and the directions that comes with the Kozmic kit are pretty unspecific in regards to the mazdaspeed.

Which brings me to my request: Does anyone have the SP63 Secondary Injection Kit install instructions?

I know the install is pretty straight forward and I won't have any issues installing it, just would like to have one more (updated and car specific) point of reference. SP63 advertises their install instructions are detailed and in color.

The end state is to be able to do a How To that's updated with the new pieces and my own custom fuel feed line, and have it accessible to anyone who needs it or is on the fence.

 

Have you looked into the coil pack harness for SS controllers made by SP63? I'm local to Kozmic and they've worked on my MS3 white a bit so I won't be playing mechanic/DIY'er and letting them install this for the safety of my motor and incase anything's wrong with the kit I can take it back to them easily.

 

I have, for 130 bucks I could have gone for it but since I already have done the wiretuck, the solder work is easy to do and I won't have a bunch of excess wire everywhere.

How long is it gonna take them to complete the install?

 

I made my own aux fuel kit. If you have questions I can try and help answer any you might have. did my own fuel lines and used a SS controller like the perm/kozmic/sp36 kit uses

 

Appreciate it... So far so good for the wiring and placement of everything. I went ahead and purchased the parts necessary to replace the HPFP nylon oem lines for some SS lines and AN quick connects. I haven't turned the SS controller on yet, still dialing the initial curve.