changed OCV and now no start

Good morning everyone, I have an odd situation, I changed the OCV on my 08 sb3 pretty straightforward, afterwords I started the car it ran great at idle I let it idle for 10 minutes or so. So I decided to drive it I made it about 800 feet just shifted to 2nd and the car died. Now it will not start. I’ve double checked everything even went as far as replacing the new one with the old. And nothing. The car has fuel pressure, spark, and timing chain appears to be normal. I am not getting any codes and I’m able to see engine speed with my scanner while cranking. I’m at a complete loss any suggestions?

 

Check all of the grounds in the area you were working

 

I have, I will double check this morning. Hopefully it’s something simple.