My 2008.5 BM MS3 Build

So a little bit of background on the car. I am the second owner, purchased July 23rd 2012, from a very nice 65 year old man. He admitted to the car being his mid life crisis, but he never modded the car and had an overabundance amount of paper work for the car. It was completely dealer serviced and taken car of by the same dealer every time. Well the car has gone through a few phases of modifications and each phase it gets better and better. Here is the mod list as of 2/10/2016:
Performance:
Tuned by Mark Gibson FTW
Built motor by me
Manley pistons and rods and all new gaskets and shiznit
PTE gen2 6266
DCR exhaust manifold
Cobb Accessport V2
Autotech HPFP internals
Custom 6th port by me (and Jake)
CNT Racing Catback exhaust with Burnt Blue Tip
Custom Catless Downpipe
CP-E Injector seals
HTP hotside intercooler pipe
HTP 4 inch (shortened)
Optima Red Top 35 battery
-Relocated battery to hatch
JMF V1 intake manifold
eBay vented OCC and DM sealed OCC with DM PCV Plate
eBay Vented OCC off Valve Cover
Pu Valve Cover
Grimspeed EBCS
3.5 Bar Map Sensor
DW 300c ITFP
Synapse BOV with anti-stall kit
Kozmic EGR delete
CP-e Stage 2 RMM and 70 duro PMM and TMM
Corksport Urethane Exhaust Hangers
17x9 +45 (5mm spacer up front) Matte Black RPF1
Handling/Braking:
KW V3 coilovers
Corksport RSB black
SPC Adjustable Rear Camber arms
Tri-Point Adjustable rear end links
Techna-fit SS brake lines
HP+ pads
Autozone Blanks
Wilwood SP600
Autopower Race Roll Bar
Sparco Sprint Racing Seat Red
-BuddyClub bracket and slider
G-Spec 6-point Harness with camlock
Cobb Short Shifter

Interior/Aesthetics:
Independent Fogs
35watt 4300k low beams
Tint - 50% front 5% rear 50% windshield
Side Molding Delete
Kicker 8x6 speakers all doors
Switchback led turn signals

I love the car and can't wait for it to come back this next season. She will be a monster and can't wait to see what Mark can pull out of her before I break more shit! The endless money pit has been my greatest joy for some time now and has been the reason for me meeting some of my closest friends I have now. @Sho has been there in the freezing barn with me almost every week helping me along the way with the build and I can't ask for a better friend. Enough of the gushy shit and onto PICTARS!

 

Can't wait to see this thing back up and running, homie!

 

I don't see that exhaust manifold often. Looks good!!

 

Thanks to Rob for selling her. She will live again with a big ass PTE hangin from her tit

 

how does anyone sit in your back seat? lol jk jk good looking build hommie

 

I got dibs of sitting in the back seat first....

 

you have to go without a helmet and without a seat belt....

 

Done deal.. does the ride come with ky.. so I can squeeze between the bars

 

Sub'n

-Evan #2

 

So spent the Friday and Saturday taking off my KW V1's in preparation for the new setup I am getting. So the car is on jack stands and blocks of wood holding the LCA's up to not stress them. I also mounted the new Optima Red Top battery in the hatch. Its mounted very securely to the spare tire cover but its heavy to now it seems like it will move around a lot if I'm driving hard. I didn't have to worry about the with the little Deka battery. So I think I'm going to bolt the spare tire cover to brackets that I am going to weld to the unibody. But the car has turned over! Sounds pretty good from what I can hear. I just turned it over to get the oil system primed. Should have the new suspension setup this week. Hope to also have my new welder come in this week so I can fab up the downpipe and the dump tube. The rest of the stuff I have is all cosmetic stuff. Other than getting a controller from Split second for the 6th port. I did get my new BOV in the mail too. I went with the Synapse Blow off Valve with anti stall kit. I just wanted to try something different so I went with something without a diaphragm.


With only 5k miles on them they still look brand new!

 

What suspension are you planning on getting?

 

KW V3's with 2k miles on them. Sold my V1's for 900 and got the V3's for 400+ stock suspension.

 

Damn you and your haggling skills HAHA! Good deal. You'll love the V3's.

 

I make out when people need money lol. But also came across a good deal on a crank that has been polished today. Offered the guy 150 and he took it. So I'm going to have it keyed and going to have it as a spare to throw in if my bearings decide to let go again this next season or I'll just throw it in next winter with some OEM bearings. Just need to get some timing and oil pump gears to key too and I'll be good to go.

 

Why did you have to shorten the 4" HTP?

 

I had to get a new elbow made for my mani and I used a lot better quality materials which were thicker so it pushed my turbo over to the driver side more. And now the HTP intake doesn't line up where it should. And I just learned how to weld so I'm cutting up everything and changing it lol.

Sent from my VS986 using Tapatalk

 

So I'm getting my powedercoated stuff back today and needless to say I'm pumped. I've gotten a few teaser pics and it looks great as far as I have seen. I'll post more pictures today once I put it all on. So onto a little update the 6th port has been wired up, thanks to @Sho. Fueling system is complete with the 6th port with 2200cc injectors and then a DW300c ITFP. After doing the ITFP a couple times I made this How-To (http://mazdaspeeds.org/index.php?threads/how-to-itfp-replacement.1186/)
Today I'm going to throw some matte black paint on a few things to clean the rest of the engine bay up and then I'm going to figure out how to make a new downpipe and get it welded up tonight. Then all the car will need is a dump tube which I just don't want to make so its going to Mark Gibson's shop and he will fab that up for me. Then hopefully the car can be tuned and ready to go. I have a spare crank I got for a steal and then some new timing sprockets and a crank pulley to get keyed for next winter or if the motor doesn't last all summer with the new turbo and power adders. Also picked up a Cobb short shifter for a good price so I couldn't say no and threw that in too. Will update tonight with pictures of more progress.

 

I have the synapse and love it, nice build man!

 

+1 on Synapse, though mine is the Synchronic Diverter Valve, not the other one...

 

Yes I'm excited to hear it, that is if I can hear it over the rest of the car. But I wasn't paying attention when I bought it and they sent a stainless weld on flange for it so rather than buying an aluminum flange for it which was $28 I bought some 2.5" ID stainless pipe for $7 and made a new section of cold pipe and welded the SS flange they sent with it. Got it installed and now the intercooler setup is done. This is the first thing I've welded and made myself for my car, it isn't pretty but I made it and I'm proud of it. I welded bead rolls onto each side too.




Then yesterday I got some stuff back from the Powdercoaters. Took a while but he got the color right this time and I love it.
Its illusion blue and the first stage which is color goes on and looks like this:

Then after the clear vision top coat gets put on the purple and blue come out:

Then some pictures of it on the car with shitty lighting in the barn:



Hoping to have the engine bay done tonight and have it all wrapped up. I'm going to be putting a DP together and getting it all ready to take to school and weld up. Then it can essentially start. Just need a start up tune from Mark Gibson and then she will be ready to rock